Details Tab

The Details tab contains the physical addresses and contact details associated with the marker. You can add more than address or set of contact details if you want, as well as editing the address details associated with the marker.

1:

Addresses: the addresses of the marker location, and any associated address details (for example, the physical address of the marker and the address of the headquarters of the company that owns the marker's site; or an alternative street entrance for large depots; or a post office box).

2:

Contacts: the name and phone number of the marker contacts, and the contact type: home, work, or mobile.

3:

Edit: click this button to switch to the Edit view. In this mode you can change, and add to, the marker's address and contact details.

Editing Marker Address Details

To edit the addresses associated with this marker:

1.Click the Edit button. The dialog box switches to Edit mode.

 
2.Click the Edit button () beside an existing address to edit it, or click the blue Add Address link to add a new address. The Edit an Address or Add an Address dialog box opens, depending on your selection:
 
Edit Address Dialog Box
 

Add Address Dialog Box
 
3.Edit the address details shown in the Edit Address dialog box and click OK to save. If adding a new address on the Add Address dialog box, choose an address type from the Address Type drop-down (Postal, Physical or Alternate) and type the full address into the Raw field.

 
 
If you know only parts of the address (for example, if you do not know the postcode or state), click the Make Structured button to change the dialog box to structured address view, then enter as many of the address components as you can.

 
 
Click Add and the platform attempts to find the address. If the address is found, the dialog box closes and the address is added to the Details tab. To delete any additional address, click the Delete icon () beside the address. At least one address is required.

 
4.Click Save.

Editing Marker Contact Details

To edit the contact details associated with this marker:

1.Click the Edit button. The dialog box switches to Edit mode.

 
2.Click the Edit button () beside an existing contact to edit it, or click the blue Add Contact link to add a new contact. The Edit Contact or Add a Contact dialog box opens, depending on your selection:
 
Edit Contact Dialog Box
 

Add a Contact Dialog Box
 
3.Edit or add the contact details (name, type and number) then click the OK or Add button. The contact details are updated on the Details tab

 
4.Click Save.